Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission if you buy through the Amazon links in this article. How our links work.

Choose a RØDE DS1 desktop stand if your microphone needs more height and you can leave a base near your speaking position. Consider the RØDE PSA1+ boom arm if worksheets, a keyboard or a drawing tablet occupy that space and you need to bring the microphone in from the desk edge. Keep the supplied stand if it already puts the microphone where you need it without interrupting the lesson.

This comparison uses the NT-USB Mini as the concrete microphone example because RØDE explicitly lists both the DS1 and PSA1+ as compatible accessories. [5] It is a mounting decision for seated teaching and recording, not a recommendation to replace a working microphone.

Research basis: Official RØDE product pages, data sheets and support guidance, plus exact Amazon product listings, checked October 27, 2026. Recommendations apply documented dimensions and compatibility to teaching tasks. No hands-on stability, noise or durability testing was performed.

Start with the space your lesson needs

Choose around the recurring placement problem, then check the physical fit.
Your situationStart withMain trade-off
Microphone is too low; desk space is availableDS1 desktop standRaises the microphone but leaves a base on the desk
Writing area must stay clearPSA1+ boom armMoves the mic over the work area but needs a suitable mount and swing space
You pack up after every lessonExisting base or a desktop standFewer mounting steps; still check carrying weight
Existing position sounds clear and stays out of the wayKeep the current standNo new purchase needed

On a small screen, scroll the table to see all columns.

For a worked example on paper, mark the whole area your hands and worksheet use before planning microphone placement. Include the space needed to turn a page. For slide narration, place your notes where you can read them without repeatedly turning away from the microphone. A stand that fits the unused desk can still be wrong for the lesson in progress.

DS1: raise the microphone without attaching to the desk

RØDE specifies a 260–405 mm height adjustment for the DS1. Its data sheet gives a 147 × 147 mm footprint and 980 g stand weight. [1,2] Those measurements make it a candidate when the existing base sits too low, but they also show why it is not automatically a space-saving replacement.

The NT-USB Mini’s original base is approximately 89 mm wide. [6] A DS1 therefore asks for more surface area in exchange for height. Sketch both footprints beside your keyboard and check the microphone position while seated normally. Avoid buying the taller stand only to discover that it blocks the bottom of your monitor or sits on the worksheet.

A freestanding base can suit a shared desk where a clamp is impractical or furniture cannot be modified. That is a workflow judgment, not a guarantee against tipping. Keep the base fully supported, route the cable away from your chair and check stability with the microphone attached before relying on it during a class.

PSA1+: reach in from a suitable desk edge

The PSA1+ provides a moving arm, USB/XLR cable management and both clamp and threaded-insert mounting options. RØDE lists support for a microphone or shockmount assembly weighing 94 g to 1.2 kg. [3] Its data sheet specifies up to 940 mm horizontal reach, 860 mm vertical reach, a clamp for surfaces up to 70 mm thick, and an insert for surfaces up to 55 mm thick. [4]

Measure from the proposed mounting point to your speaking position, not from the nearest convenient desk corner. Then check the space above and behind the screen. The arm needs a useful working position and somewhere to go when you are grading, writing or using a document camera.

Desk thickness alone is not enough. Inspect the underside for drawers, cable trays, sloped edges or a metal frame that would prevent the clamp from seating properly. Check the furniture maker’s restrictions for glass, hollow or fragile tops. On school furniture, use an approved mounting method; the threaded insert is not a reason to drill a shared desk without permission.

For a permanent recording station, the arm can earn its place by letting you reposition the microphone between speaking and writing. If the edge is inaccessible, the arm would cross your face on camera, or you must dismantle it every day, the simpler DS1 or supplied base may be the better fit.

Check the microphone, thread and complete load

The NT-USB Mini has a detachable magnetic base and integrated swing mount. [6] RØDE’s accessory guidance specifically confirms DS1 and PSA1+ compatibility. [5] Keep the microphone’s mounting hardware together when removing the original base, and follow the supplied setup instructions rather than forcing a thread that does not engage smoothly.

The PSA1+ data sheet lists a supplied 3/8-to-5/8-inch thread adapter. [4] For another microphone, check the microphone’s mount or clip thread, the arm’s connection and the weight of everything suspended from it, including any shockmount or pop filter. A matching screw thread does not establish that the assembly is within the arm’s supported load.

The reviewed Amazon PSA1+ listing identifies the black PSA1+ model, but its short feature text gives a 0.25–1.2 kg load range rather than RØDE’s 94 g–1.2 kg specification. [3] This guide uses the manufacturer specification and its explicit NT-USB Mini compatibility confirmation. If your different microphone assembly is near a limit, obtain confirmation for that exact setup before buying; do not treat the listing summary as a universal fit chart.

Also keep the plus sign in the product name. RØDE’s original PSA1 page specifies a 700 g–1.1 kg microphone-and-mount load range. [7] It is a different product with different limits. The shopping link here selects PSA1+, not PSA1, a coloured variant or a microphone bundle.

RØDE’s DS1 page does not publish a general maximum microphone load in the information reviewed here. Its explicit NT-USB Mini compatibility supports that pairing; it does not establish that every heavier microphone is suitable. For the AT2040USB or another model, verify the complete mount and load separately rather than transferring this recommendation by analogy.

If you are choosing the microphone as well, read our USB microphone comparison first. Keep microphone selection and mounting compatibility as two checks, even when a retailer offers them in one bundle.

Plan the cable and test the actual lesson

Leave enough cable slack for the arm’s full intended movement without pulling on the microphone or computer socket. Route the cable before tightening it into clips. Neither stand changes the microphone’s USB requirements, provides an audio connection by itself or proves compatibility with a longer cable or hub.

Use our small-desk recording setup guide to reserve ports, cable reach and the working area together. Include any required mount adapter or suitable cable in the complete purchase cost; check what the selected package actually includes.

Record a short sample with the current stand before changing anything. Read a few sentences, type a line, turn a page and look toward your notes. After mounting the microphone on the new support, repeat the same actions at the same recording settings. Listen to the saved files for speech clarity, bumps and changes as you move.

RØDE describes noise-isolation features for the PSA1+, but those claims do not establish how your desk, typing or microphone will sound. [3] A support can improve placement without solving every source of noise. Keep it only if the new position removes the repeated problem without adding obstruction or unstable movement.

If your main difficulty is keeping a consistent microphone distance while moving, revisit our headset-versus-desk-microphone guide before buying a larger arm. An existing headset may suit that teaching pattern better.

The DS1 is the practical candidate for extra height with a usable base position. The PSA1+ is the candidate for freeing the central work area when the desk and cable route support it. If the original base passes the same lesson test, keep it and spend nothing. At checkout, verify the exact model, condition, included hardware and return terms; this comparison makes no price, stock or seller guarantee.

Sources

1. RØDE — DS1 height adjustment

2. RØDE — DS1 dimensions and weight

3. RØDE — PSA1+ features and supported load

4. RØDE — PSA1+ reach, clamp limits and adapter

5. RØDE — NT-USB Mini accessory compatibility

6. RØDE — NT-USB Mini base and swing mount

7. RØDE — Original PSA1 load range

Read with your own setup in mind. Specifications and account settings can change; use the linked documentation when checking a purchase.

Our editorial standards