Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission if you buy through the Amazon links in this article. How our links work.
Choose a shared USB-C charger by the power available with both devices connected. The Anker 735 Nano II can suit a teaching laptop that accepts a 45 W supply alongside a tablet that needs no more than its second port’s 20 W allowance. If the laptop needs 65 W, keep its charging separate: the single-port Anker 715 Nano II is one candidate, with the tablet using its own adapter. Neither choice replaces checking the exact devices and cables. [1–3]
Research basis: Official Anker and Microsoft documentation and Amazon US model details checked November 4, 2026. This is research-based buying guidance, without hands-on charging, thermal or durability tests. The lesson examples below are suggested checks, not measured results.
Start with the charger that already works
Before ordering for a laptop-and-tablet workstation, write down both device models, the laptop’s supported USB-C charging port and its manufacturer’s power requirements. Ask school IT to confirm an alternative supply for a managed device. Microsoft identifies inadequate power, an unsuitable cable and the wrong port as possible reasons a plugged-in PC still discharges. [3]
Keep the existing chargers if they already support a full lesson and fit the room. A shared adapter earns its place when it reduces what you carry or solves a shortage of usable outlets. It is less useful if someone plugging in a tablet leaves the teaching laptop short of power.
| Connection | 735 Nano II · A2667 | 715 Nano II · A2663 |
|---|---|---|
| Laptop alone over USB-C | 65 W on either USB-C port | 65 W on its one USB-C port |
| Laptop and tablet on USB-C | C1: 45 W; C2: 20 W | Requires a separate tablet charger |
| All three 735 ports occupied | C1: 40 W; C2: 12 W; USB-A: 12 W | Not applicable |
| Reason to shortlist | One adapter for a compatible lower-power pair | Dedicated laptop supply up to 65 W |
On a small screen, scroll the table to see all columns.
735 Nano II: plan the pair before adding a phone
Picture a laptop running the meeting while an iPad shows a worked example. If the laptop manufacturer confirms that 45 W is adequate for that use, put it on C1 and the tablet on C2. This gives you a concrete two-device arrangement to test. Do not buy on the assumption that the “65 W” label means 65 W for the laptop plus another 20 W for the tablet. [1]
The spare USB-A port changes the decision. Adding a third device reduces the published allocations to 40 W, 12 W and 12 W. If your laptop needs the full 45 W allocation, leave that third port unused during teaching. A label on the charger saying “laptop C1; tablet C2” can help a colleague reconnect the same arrangement. [1]
View Anker 735 Nano II 65W, A2667111, on Amazon (paid link)
715 Nano II: keep the laptop allocation separate
The 715 has one USB-C output, rated up to 65 W. Consider it as a replacement or spare for a compatible laptop when the tablet can keep its existing charger. The trade-off is two adapters and two outlets, but connecting the tablet does not share this adapter’s output. If the original laptop supply already does that job, there is no reason to replace it solely to match brands. [2]
Neither model is the choice for a laptop whose required supply exceeds 65 W. Nor does matching wattage alone establish compatibility: the laptop must support the charger’s output profiles and the chosen charging connection. Keep the manufacturer-supplied arrangement when those requirements are unclear. [2, 3]
View Anker 715 Nano II 65W, A2663, on Amazon (paid link)
Budget for cables and any hub
Use a USB-C-to-USB-C cable documented for the laptop’s required power; a familiar connector shape is not enough. For a Lightning tablet, select the appropriate USB-C-to-Lightning cable. Anker describes cables as separately sold for these products, so include them in the purchase plan and inspect the actual offer’s included items. No separate cable shopping destination is recommended here. [1–3]
If charging passes through a hub, compare the power delivered to the laptop after the hub’s own requirements. Our USB-C hub guide explains that distinction. Do not apply the charger’s full output figure directly to the laptop without checking the hub specification.
For a laptop-and-iPad teaching workstation, rehearse the actual lesson with both devices, the display and your normal applications running. Note battery levels at the start and end, check for charging warnings, and repeat the check with the intended cable lengths. A setup that charges an idle laptop may not meet the lesson’s needs.
Check the model at checkout: this comparison covers the 735 Nano II A2667, listed as A2667111, and the 715 Nano II A2663. Do not transfer these power splits to another product bearing “735,” a different regional plug or a bundle. Compare the full cost of required cables and the actual return terms, then keep the arrangement that passes the rehearsal.
Sources
1. Anker — 735 Nano II A2667 specifications and port allocations
2. Anker — 715 Nano II A2663 specifications and US output profiles
3. Microsoft — PC charging slowly or discharging while plugged in
Read with your own setup in mind. Specifications and account settings can change; use the linked documentation when checking a purchase.
Our editorial standards